MAK Petrosupplies supplies industrial epoxy coating systems tailored for GCC market demand — high-durability flooring for warehouses and factories, anti-corrosion coatings for steel and tanks, and heat/moisture-resistant protective systems suited to the region's climate. Sourced through MAK's UAE and EU-registered trading operations for bulk industrial buyers across the Gulf.
HIGH-DEMAND PRODUCTS
• Industrial epoxy floor coatings (warehouses, workshops, parking structures)
• Anti-corrosive coatings for steel tanks and pipelines
• Water tank & pipeline internal lining epoxy
• Heat and chemical-resistant epoxy systems
Products in this category are backed by full technical documentation (TDS, SDS) available on request.
---
PRODUCT IDENTITY
- Product Name: MAK Epoxy Flooring & Anti-Corrosion Coating Systems
- Chemical Composition: 2-component epoxy resin and hardener (solvent-free, solvent-based, or water-based systems)
- Governing Standards: ASTM C 579 / ASTM D 4541 / ISO 12944
- Appearance: Liquid resin (Part A) and hardener (Part B), pre-cure; cured film per selected color/finish
---
SPECIFICATION LIMITS (per ASTM / ISO test methods)
Core Parameters
- Mixing Ratio (Resin : Hardener): product-specific, typically 2:1 to 4:1 by volume
- Compressive Strength: ≥ 55 MPa (cured floor systems)
- Adhesion / Bond Strength: ≥ 1.5 MPa (concrete substrate, pull-off test)
- Pot Life: 30 to 45 minutes at 25°C
- Full Cure Time: 5 to 7 days (light foot traffic after 24 hours)
- Service Temperature Range: -10°C to +60°C (higher for specialty heat-resistant grades)
Performance Parameters
- Abrasion Resistance: high (Taber test, per ASTM D4060)
- Chemical Resistance: resistant to oils, mild acids/alkalis, and industrial solvents (per ASTM D1308)
- Corrosion Protection Category: up to C5-M / C5-I (per ISO 12944)
- Water Vapor Transmission: low (suitable for damp-proofing applications)
- Fire Performance: Class per EN 13501-1 (where applicable)
Each shipment is accompanied by an independent Certificate of Analysis / Test Report confirming conformity with the above limits at the time of dispatch.
---
PACKAGING OPTIONS
- Standard kits: 5kg, 20kg sets (resin + hardener)
- Bulk drums: 200L
- Custom volumes available for large industrial and project orders
- Color range: standard RAL colors; custom colors on request
---
ORIGIN AND DOCUMENTATION
- Verified international supply chain
- REACH-registered (EU) under MAK's Rotterdam operations
- Documentation provided on request: Safety Data Sheet (SDS), Technical Data Sheet (TDS), Certificate of Analysis (COA), Certificate of Origin
---
REGULATORY COMPLIANCE AND REGISTRATIONS
MAK operates under verified legal and regulatory registrations across both the UAE and European Union:
- REACH Registration (EU): Registered through ReachCentrum under MAK's Rotterdam trading operations
- UAE Trade License: No. CN-3025916, Al Ain, UAE
- Tax Registration: TRN 104597118900003 (UAE) and VAT NL828285524B01 (Netherlands, EU)
- EORI Registration (EU): Enabling customs clearance and cross-border trade within the European Union
---
OUR TRADING OPERATIONS
UAE Headquarters
Villa 19, St 15, Sheikh Khalifa, Al Ain, UAE
Serving GCC and MENA buyers directly.
Europe Branch - Rotterdam, Netherlands
Strevelsweg 700, 3083 AS Rotterdam
Operated in partnership with BMG International, Italy.
---
DELIVERY AND PORT OPTIONS
For large-volume orders, MAK arranges bulk delivery to a port near the buyer's location. Delivery can be coordinated via:
- Gulf ports (Jebel Ali, Khalifa Port, and other GCC terminals) for Middle East buyers
- European ports (Rotterdam and other major EU terminals) for buyers across Europe
- Alternative ports upon request, subject to availability and route feasibility
---
BOOKING AND RESERVATION TERMS
1. Quotation: All orders begin with a formal quote request specifying product type, quantity, packaging, destination, and preferred Incoterm (FOB, CIF, CFR, DAP, or EXW).
2. Order Confirmation: Upon price agreement, a Proforma Invoice or Sales Contract is issued.
3. Payment Terms: Telegraphic Transfer (T/T) or Letter of Credit (L/C).
4. Lead Time: Provided at time of quotation based on order volume and availability.
5. Quality Claims: Must be raised in writing within 7 business days, supported by an independent inspection report (SGS, Intertek, or equivalent).
---
REQUEST A QUOTE
Ready to order or need current pricing and availability?
Request a Quote
For technical documentation or bulk inquiries, contact our trade desk directly:
info@mahaweralkhalij.com | +971 52 220 1004